Beta Marine Deutz Generating Sets

Our standard specification includes marine heat exchanger cooled Deutz marine engines with either classified or non-classified specification. Keel / hull cooling is also available - prices on request (air cooled engines are available from Deutz). We include Mecc Alte ‘marine rated’ alternators, alternative alternators can be offered as an option.

Deutz Marine Generating Sets

Classified - kVA Rating 3 Phase @ 0.8PF  
50Hz - 1,500 rpm 60Hz - 1,800 rpm Genset Model
86 TBA BF4M1013M
107 TBA BF4M1013MC
133 TBA BF6M1013M
159 TBA BF6M1013MC
226 TBA BF6M1015M
290 TBA BF6M1015MC
391 TBA BF8M1015MC
Non-Classified - kVA Rating Single Phase @ 0.8PF  
50Hz - 1,500 rpm 60Hz - 1,800 rpm Genset Model
93 TBA BF4M1013M
112 TBA BF4M1013MC
141 TBA BF6M1013M
170 TBA BF6M1013MC
244 TBA BF6M1015M
330 TBA BF6M1015MC
440 TBA BF8M1015MC

Beta Marine Generating Sets - Classifiable Specifications

Beta Marine - Marine Generating Set having a continuous rated “Prime” power output, 3 phase, at 0.8P.F., with a capability for 10% overload in accordance with ISO standard; designed, built and tested by Beta Marine Limited, each comprising:

  • Deutz marine auxiliary diesel generator engine manufactured in Germany (EU country).
  • Heat exchanger cooling complete with cupro-nickel tube bundle, with FW and SW pumps.
  • Water cooled exhaust manifold.  Water pressure and temperature alarm switches.
  • Exhaust elbow and flexible bellows section.
  • 24 volt electric start system, charging alternator and stop solenoid valve, marine type insulated return.
  • Combined start, alarm and shutdown panel engine mounted and pre-wired to engine components and including: Marine approved modular engine controller to monitor engine parameters with start and stop pushbuttons. A screen enables direct readings of oil pressure and jacket water temperature and provides engine status information. The module provides auto shutdown on fault and gives possibility for signal outputs to ship system.
  • Speed governor to control engine speed to the requirements of ISO 3046 for diesel generating set.
  • Standard lube oil filter with manual lubricating oil sump drain pump. Lube oil cooler. Pressure and temperature alarm switches.
  • Standard fuel filters and duplex changeover type fuel filters. Type approved flame retardant fuel hose connections. Double walled high pressure fuel injection lines with leakage alarm switch.
  • Dry type induction air inlet filter.
  • Marine type generator manufactured by Mecc Alte, brushless, single bearing (or two bearing on larger machines), IP23 guard, terminal box and automatic voltage regulator. Rated for marine application in ambient temperatures up to 45/50°C with class “F” temperature rises.
  • Engine and generator are close coupled together and mounted on a combined welded steel base plate.
  • Marine type failsafe anti-vibration mountings are included to isolate the set from the ships seating.
  • Combined full load works test.
  • Fully classifiable specification suitable for survey.

Beta Marine Generating Sets - Non-Classifiable Specifications

  • Non-classifiable Deutz marine auxiliary diesel generator engines have a slightly higher output power.

Optional Extras and Alternative Equipment

  • Prepared for parallel operation.
  • 2 bearing generator with flexible coupling drive (where not included as standard).
  • Starter batteries.
  • Alternative means of start.
  • Extra alarm and protection switches necessary for ‘unmanned’ specifications such as UMS.
  • Extended / alternative control panels.
  • Prepared for keel cooling.
  • Dry acoustic or spark arrestor exhaust silencers.
  • Fuel/water separators.
  • Anti condensation heaters for generator and/or block heater for engine.
  • Mains output panel / marine switchboard.
  • Torsional vibration analysis suitable for presentation to class society (classifiable specification only).
  • Classification society surveys (classifiable specification only).
  • Class approval of torsional vibration analysis (classifiable specification only).
  • Double walled fuel injection lines with leakage alarm switch and alarm in panel (already included on classified specification).
  • Duplex changeover type fuel filter (already included on classified specification).
  • “Type” approved flexible fuel connections (already included on classified specification).
  • Export packing and delivery FOB UK port or home skid packing and delivery UK.

Notes: Alternators are selected to give marine ratings for class ‘F’ temperature rises in marine ambient engine room temperatures of 45°C. Frame sizes may alter to meet required voltage / frequency.